Jubilee type radiator hose clip for Austin Healey BN1 to BJ8. This adjustable, worm-drive style clip is used to secure the main radiator hoses so the hose seats firmly on the radiator and engine connections.
Yes, this Jubilee type clip is used on the main radiator hose connections across BN1 to BJ8 models.
Excludes: This is not the 1/2 inch clip used on the small heater take-off hose found on bottom hose with heater pipe variants.
Note: Bottom hoses with heater take-off (BN4-BJ8) also require 1/2 inch clips for the smaller heater hose connection. Choose either Jubilee 1/2 inch or O.E. double wire 1/2 inch.
Jubilee type is the most adjustable and easiest to fit.
For a more original appearance, use the O.E. double wire type. For early cars that originally used pin and strip clips, use the Pin & Strip type.
For hose selection background, see: CapeSport silicone radiator hoses for BN1-BJ8.
Main radiator hoses commonly use four clips in total, but the exact count depends on the hose set and whether a heater take-off hose is fitted.
No. The O.E. double wire and pin and strip styles better match period appearance, depending on model and preference.
Yes. Tighten carefully and recheck after the first heat cycle to avoid over-compressing the hose.
JUBILEE TYPE
